
Bio metalworking fluids
Bio-sourced top-tier neat oils & soluble oils for the end-user.
Premium metalworking fluids (neat oils or microemulsions) who in particular offer optimal performance, with productivity gains and respect for the health of operators thanks to it’s Ultra-Low Friction superfatty character typical of VOLTRION products.
Top-tier Performance
Our products perform as well as, or even better then their mineral based counterparts, request our technical.

Bio neat oil for cutting, bending, punching, holing, light stamping and profiling, sawing, drilling, light threading
KV40°C = 10 cSt
Flash Point >200°C
VOLTMET™ C-10 Special biobased low viscosity fatty neat oil for cutting, bending, punching, holing, light stamping and profiling operations. Also perfectly suitable for sawing, drilling, light threading. Can be applied by spraying systems, droplets, roller systems. For any material: aluminum, copper (and alloys), steel, zinc-coated steel and stainless steel.
Free from chlorine, sulfur and VOC. No risk for operators. Clean workspace
Specifically designed to replace evaporative fluids and light mineral oils. No Need to clean !
Ultra-Low Friction superfatty caracter typical of VOLTRION products.

High evaporative bio neat oil for more severe stamping and drawing operations.
KV40°C = 10 cSt
Flash Point >180°C
VOLTMET™ C-10E
Special biobased fatty low viscosity high evaporative neat oil specifically formulated for more severe cutting and stamping operations. Can be applied by spraying systems, droplets, roller systems. For any material: aluminum, copper (and alloys), steel, zinc-coated steel and stainless steel.
Free from chlorine, sulfur and VOC. No risk for operators. Clean workspace
Specifically designed to replace evaporative fluids and light mineral oils. No Need to clean !
KV40°C= 10 cSt
Ultra-Low Friction superfatty character typical of VOLTRION products.

Extreme pressure biolubricant, drilling, tapping, threading, cutting and deep-drawing operations
KV40°C = 50 cSt
Flash Point >160°C
VOLTMET™ C-50
Special biobased fatty neat oil specifically formulated for drilling, tapping and threading operations that are usually made with chlorinated fluids. For any material: aluminum, copper (and alloys), steel, zinc-coated steel and stainless steel, application with felt rollers or spraying systems.
Free from chlorine, sulfur and VOC.! No risk for operators. Clean workspace
KV40°C= 50-60 cSt
Ultra-Low Friction superfatty character typical of VOLTRION products.

Extreme pressure biolubricant for deep-drawing operations
KV40°C = 220 cSt
Flash Point >150°C
VOLTMET™ C-220
Special biobased fatty neat oil specifically formulated for deep- drawing operations that are usually made with chlorinated fluids or high viscosity mineral oils. Improves parts finishings and tools lifetime.Can also be used for threading and drilling. Any material: aluminum, copper (and alloys), steel, zinc-coated steel and stainless steel,
Free from chlorine, sulfur and VOC.! No risk for operators. Clean workspace
KV40°C= 220 cSt
Ultra-Low Friction superfatty character typical of VOLTRION products.

biobased soluble lubricant for metal working, for all kinds of machining operations as well as shaving removal. Compatible with all copper alloys.
KV40°C = 20 cSt
Refractometer reading: 1.2
VOLTMET™ S-2 microemulsion, biobased soluble lubricant for metal working, for all kinds of machining operations as wel as shaving removal. Compatible with all copper alloys.
Soluble in water (1 to 10% dilution, stable up to 25%), without mineral oil, VOCs free, vegetable polymer base. No safety labeling.
Refractometer reading: 1.2
Ultra-Low Friction superfatty character typical of VOLTRION products.
ADVANTAGES:
– Reduces dilution rates by 2 or 3
– very clean workspace
– allows post-operations without cleaning the parts.
– Detergent effect, clean machine.

biobased soluble lubricant for metal working, for stamping and deep drawing . Compatible with all copper alloys.
KV40°C = 80 cSt
Refractometer reading: 1
VOLTMET™ S-8 microemulsion, biobased soluble lubricant for metal working, for stamping and deep drawing . Compatible with all copper alloys.
Soluble in water (1 to 10% dilution, stable up to 25%), without mineral oil, VOCs free, vegetable polymer base. No safety labeling.
Refractometer reading: 1
Ultra-Low Friction superfatty character typical of VOLTRION products
ADVANTAGES:
– Used pure or as a replacement for sticky & high viscosity mineral oils which are difficult to clean.
– Reduces dilution rates by 2 or 3
– very clean workspace
– allows post-operations without cleaning the parts.
– Detergent effect, clean machine