Renewable solutions. Purpose-built performance.
From concrete and asphalt to precision metalworking and coatings, Voltrion transforms vegetable oils into specialised bio-based products through proprietary electro-synthesis. Explore the product families and their technical characteristics below.
01 / Product families
Bio form oils & asphalt release agents
Low, medium and high viscosity bio form oils for concrete work and form materials of all kinds. Bio asphalt release agents prevent bituminous materials from sticking to trucks, machinery and tools.
Up to 100% renewable raw materials. Fully REACH-compliant.
| Product & application | Viscosity | Application temperature |
|---|---|---|
| BIOFORM 10Very low viscosity mould release agent for concrete mixers, chutes and nonporous forms (steel, aluminium and plastics). Also suitable for excavator scoops and truck loading bays. | Very low | Down to −12°C |
| BIOFORM 20General-purpose bio-based form oil for concrete work and most form materials, including wood, steel, aluminium and plastics. | Medium | Down to −3°C |
| BIOFORM 40Higher viscosity form oil specifically formulated for porous materials (wood and plywood) and vertical application. | Higher | Above +3°C |
| BIORELS 12Biodegradable, non-hazardous asphalt release agent for clean, easy separation of bituminous materials from dump trucks, haul trucks, machinery, tools and curbs. | Asphalt release | — |
02 / Product families
Bio metalworking fluids
Premium bio-sourced neat oils and soluble fluids for machining and forming. Voltrion’s ultra-low-friction superfatty character supports demanding metalworking operations.
Neat oils are suitable for aluminium, copper and alloys, steel, zinc-coated steel and stainless steel. They are free from chlorine, sulfur and VOCs.
Bio neat oils
| Product & application | KV40°C (cSt) | Flash point |
|---|---|---|
| VOLTMET™ C-10Low-viscosity bio neat oil for cutting, bending, punching, light stamping, profiling, sawing, drilling and light threading. Applied by spray, droplets or rollers. | 10 | >200°C |
| VOLTMET™ C-10EHigh-evaporative bio neat oil for more severe cutting, stamping and drawing operations. Applied by spray, droplets or rollers. | 10 | >180°C |
| VOLTMET™ C-50Extreme-pressure bio neat oil for drilling, tapping, threading, cutting and deep-drawing. Designed to replace chlorinated fluids; applied by felt rollers or spray. | 50–60 | >160°C |
| VOLTMET™ C-220Extreme-pressure biolubricant for deep drawing, with additional threading and drilling applications. Designed to replace chlorinated fluids and high-viscosity mineral oils. | 220 | >150°C |
Water-soluble microemulsions
| Product & application | KV40°C (cSt) | Refractometer factor | Water dilution |
|---|---|---|---|
| VOLTMET™ S-2Bio-based microemulsion for machining and chip removal. Compatible with copper alloys. Mineral-oil-free, VOC-free vegetable polymer base with a detergent effect. | 20 | 1.2 | 1–10%¹ |
| VOLTMET™ S-8Bio-based microemulsion for stamping and deep drawing. Compatible with copper alloys. Can also be used neat to replace sticky, high-viscosity mineral oils. | 80 | 1 | 1–10%¹ |
1 Microemulsions: 1–10% dilution in water, stable up to 25%.
03 / Product families
POLYVOLT™ polymerized vegetable stand oils
POLYVOLT™ premium technical-grade modified vegetable oils are electro-bodied through a combination of proprietary electro-synthesis and either thermal treatment or oxidation. For inks, paints, coatings, greases and lubricants.
0% hydrocarbons. 100% renewable raw materials. Bio-based according to EN 16755:2014; fully REACH-compliant.
| Product & application | Viscosity | Measurement / grade |
|---|---|---|
| Soybean · Linseed · RapeseedFor alkyd resin production and as additives in paints, greases and lubricants. | 2–90 poise | 20°C |
| Sunflower · Castor oilBinders for white paints with very low yellowing, and additives in coatings and lubricants. | 10–200 poise | 20°C |
| LinseedFor paints, varnishes, lacquers and alkyd resin production. | 2–200 poise | 20°C |
| Blown rapeseed · Castor oilsNatural viscosity modifiers for paints, lacquers, lubricants, greases, cutting oils and chain oils. | ISO 650 / 750 / 1150 | Standard grades |
Ready to evaluate in your formulation?
Request a technical datasheet and sample evaluation kit for laboratory bench testing.